How to clean the ceramic filter plate is better?
- Categories:news
- Author:
- Origin:
- Time of issue:2022-03-31 10:11
- Views:
How to clean the ceramic filter plate is better?
- Categories:news
- Author:
- Origin:
- Time of issue:2022-03-31 10:11
- Views:
Ceramic filter plate has corrosion resistance, high temperature resistance, high mechanical strength, no harmful substances dissolved, no secondary pollution and so on. Under the action of fluid pressure, the micropore will not be deformed, easy to clean and regeneration, long service life. It can replace cotton cloth, silk fabric, plastic, wire mesh, asbestos and other filtering materials, widely used in solid-liquid separation, gas-liquid separation, powder transportation, oil-water separation, brewing industry separation, air filtration, circulating water filtration and other devices. Especially suitable for filtering boiler dust removal wastewater and slag water.
Particles may block the micropores on the surface of the ceramic filter plate, or a small number of small particles may enter the micropores inside the ceramic filter plate, causing blockage and affecting productivity, which should be cleaned.
Ensure recoil pressure for each cycle. Its function is to recoil from the inside of the ceramic filter plate to wash away the fine particles or particles on the surface.
Ensure chemical and physical cleaning during parking cleaning. First of all, ensure the time and quality of each cleaning, to ensure that cleaning in place. Two, do not stop cleaning the machine when the ceramic filter plate is seriously blocked. Ensure that the ceramic filter plate is regenerated.
Choose the right detergent. Chemical cleaning agent makes it difficult to wash out the fine particles chemical reaction to achieve the purpose of refinement, and then combined with cyclic recoil will wash away the fine particles. Different chemical cleaners can be selected for different sizes to achieve particle refinement.
According to the characteristics of different slurry choose ultrasonic equipment. Physical cleaning uses ultrasonic cleaning. The power frequency electric energy of the power supply is converted into high frequency electric signal, and the electric energy is transmitted to the frequency converter through the high frequency cable. Ultrasonic transducers convert high-frequency electrical energy into powerful ultrasonic waves that are transmitted outwards. Vibrating in an aqueous solution of the ultrasonic water tank produces a powerful shock wave, which is affected by dirt on the surface of the ceramic filter plate. Because ultrasonic attenuation in aqueous solution is very small, it is possible to clean surfaces (including gaps and holes) immersed in liquid. Clean the surface of the physical immersion ceramic filter plate. The general temperature is 20-50℃, aqueous solution is better. Spindle speed slows down during cleaning. After a period of time, please adjust the spindle speed or use automatic frequency following ultrasonic equipment to achieve each cleaning point. If the surface of ceramic filter plate is sticky, high frequency ultrasonic transducer can be used.
News center
+86-591-22277633
Time:08:00-17:00
sales@metal-new.com
Looking forward to receiving your email
Message
Looking forward to receiving your message
Wuhushan Industry Area, Qingkou Investment Zone, Fuzhou, Fujian, China Contacter:Mr Ke
Join our Newsletter