Degasser can quickly remove all kinds of gas permeating mud, restore mud proportion, stabilize mud viscosity performance, improve drilling fluid quality. It has the advantages of reasonable structure design, compact and good performance.

The degasser uses the suction of vacuum pump to produce negative pressure in the vacuum cylinder, and the mud enters the hollow shaft of the rotor through the suction tube at atmospheric pressure, and then is thrown into the irrigation wall by jet form from the window around the hollow shaft. In the collision and separation wheel, the well is separated into thin layers, the foam submerged in the mud breaks, and the gas escapes and is separated by suction and separator of the vacuum pump.

The degasser uses rotary vacuum pump for two main reasons. One is the need to suck the gas into the mud in the mud tank to the top, so as to form a thin layer of flow in the baffle, cone and funnel. The second is to exhaust all the gas released in the degasser tank and the air entering it. The rotary vane vacuum pump also produces a pressure that drains the gas through a thin exhaust pipe.

The degasser is suitable for the preparation of all kinds of mud solids control systems. It not only plays an important role in restoring mud properties, but also can be used as a high-power mixer.

1, the use of negative pressure degasser, with a scientific and reasonable design structure, to ensure the effective separation of gas and liquid, impurities filtration, exhaust pipe is always smooth, can remove a lot of gas from the mud, high degassing efficiency.

2. Belt drive is adopted to prevent complication of reducer and ensure trouble-free working time.

3, water ring vacuum pump in the working process is always in an isothermal state, suitable for flammable and explosive gas, reliable safety performance.

4, the mud through the window of the rotor is launched to the four walls at high speed, the bubbles in the mud are completely broken, the degassing efficiency is high, the degassing efficiency is more than 95%.

5, the application of the soda separator so that water and gas can not be discharged at the same time, the exhaust pipe is always very smooth. It can circulate water supply to vacuum pump, which has the advantages of water saving and environmental protection.

6, self-priming device, no need to supply pump, self-priming device, no need to supply pump, eliminate corrosion, reduce the cost of repair and maintenance, at the same time, also optional infrared level monitoring system, so that the equipment to achieve automatic control.

Degasser is a secondary solid control device of drilling mud solid control system, and also a special equipment to deal with gas-immersed drilling fluid. Using a vacuum pump to generate negative pressure in the cylinder, mud under the pressure of the pipe into the hollow shaft, and then through the window around the hollow shaft to the cylinder wall spray. Due to the impact and the role of the foam separator, the foam permeated in the mud burst, the gas escapes, through the vacuum pump to the safety zone.

The above author introduces the application and advantages of degassing machine. Now are you clear?