Ceramic filter plate, also known as ceramic filter plate, guide plate, ceramic plate, filter plate, is a new filter medium made of corundum, silicon carbide and other special processes. At present, as a ceramic filter is the key component of the ceramic filter plate has been widely used in iron ore concentrate, zinc concentrate, yellow nickel concentrate, copper concentrate, concentrate, molybdenum concentrate, lead concentrate, tungsten concentrate, manganese, vanadium ore, aluminum ore concentrate, gold concentrate, nonmetal ore concentrate filtration dehydration of coal mine concentrate, fine chemical industry, paper making, pharmacy, chemical fiber, food, environmental protection and other industries of solid-liquid separation.

What is the characteristic of ceramic filter plate?

It can effectively remove large sundries in liquid aluminum and adsorb small sundries in micron size, which can improve surface quality, product performance, brown rice structure and yield. Widely used in aluminum, aluminum foil, aluminum alloy and other production fields.

How is the production process of ceramic filter plate?

The organic foam surface connecting the three-dimensional network structure and the ventilation hole is used as the carrier to penetrate into the tactile special ceramic slurry, and the ceramic slurry is evenly applied on the skeleton of the carrier, after drying and hardening, and high temperature baking.

What is the use method of ceramic filter plate?

1. Clean the filter box.

2. Put the filter plate gently into the filter box, and press the sealing pad around the filter plate by hand to prevent the side flow of liquid aluminum.

3, evenly preheat the filter box and filter plate, close to the temperature of liquid aluminum. Preheating to remove moisture, conducive to initial instant filtration. Preheating can be achieved by electric or gas heating. It normally takes about 15-30 minutes.

4. Pay attention to the change of aluminum hydraulic head when casting. The normal starting pressure head is 100-150. After the aluminum liquid begins to pass through, the head drops below 75-100 and then slowly increases.

5, avoid the normal filtration process, knock, vibration filter plate. At the same time, in order to avoid too much disturbance of aluminum water, the oil port is filled with aluminum water.

6. After filtration, remove the filter plate and clean the filter box in time.

What is the product specification and model of ceramic filter plate?

For product types, the standard is currently customarily labeled as several P's, with the number before the letter P indicating the product's hole density, corresponding to hole uniformity. Model 10P is a 25.4mm long foam ceramic filter with 7-13 hole uniformity.

Aluminum and aluminum alloy production process often use 17817850 mm, 23023050 mm, 30530550 mm, 38138150 mm, 432 432 50 different specifications and models of products, the supply and demand parties can negotiate by themselves.

What is the size and shape deviation of ceramic filter plate?

In view of the size and shape deviation of foam ceramic filter plate, five indexes, including side length allowable deviation of diagonal length allowable deviation of plane clearance thickness allowable deviation of inclined Angle allowable deviation, which have great influence on the use of foam ceramic filter plate are considered.